text me aT 919 673 3246

Include pictures and your location

POLYASPARTIC applications take TWO dayS to put down. my prices are upfront and transparent, MY means and methods are easy to understand.

Onsite consultations are not necessary to provide you with an estimate. Most companies offering polyaspartic applications conduct on-site estimates to deliver a crafted sales pitch and charge you the highest possible amount.

warranty

I agree to repair delamination in the POLYASPARTIC for a period of 15 years (from the effective date of installation) caused by Improp substrate preparation and workmanship in the Application.

This warranty does not apply and will be voided for any damages to the coating caused by physical or mechanical abuse, efflorescence, exposure to chemicals, solvents, and acids, lack of maintenance and care, hydrostatic water, internal failure of the substrate, rusting, variations in color, Variation in the amount of flake. dullness, outgassing, cracking due to substrate movement, existing coatings underneath, moisture, or any acts of God. My liability is limited to the cost of the service provided, and I am not responsible for any consequential damages or loss of profits. Both parties agree that in the event of any dispute or claim arising from this warranty, each party shall bear their own legal fees and costs, and neither party shall be entitled to recover legal fees or costs from the other party, unless otherwise agreed in writing. All claims for delamination must be submitted in writing with clear photographic evidence attached. By accepting the services, the customer acknowledges and agrees to the terms and conditions of this warranty

Last update 4/26/2023

installation PROCESS

EPOXY application

After the surface is fully prepped and cleaned, industrial-grade epoxy is applied with a combination of a squeegee and rollers. This is immediately followed by decorative color chips. The garage door is then lowered, leaving a space between the floor to avoid any damage and let the epoxy dry overnight. 

POLYASPARTIC APPLICATION

Once the epoxy is fully cured, the floor is scraped and vacuumed to remove any loose or vertically standing flakes. The final step is to spread and roll out the UV stable, industrial-grade polyaspartic clear coat. The garage door is then lowered, leaving a space between the floor to avoid any damage and to allow the polyaspartic to dry overnight.

DRYING & CURING TIME

Polyaspartic will be dry to the touch within 24 hours of mixing and pouring. Polyaspartic will not flake or lift as long as you wait 72 hours for the epoxy to fully cure. 

• 24 hours - to walk on

• 48 Hours - to move heavy items

• 72 Hours - to drive on

important

In the event of inclement weather, such as rain or cold temperatures, your installation may be delayed or rescheduled. please have all items moved out of the garage and all vehicles must be off the driveway to avoid delays. electricity and water must be available at the time of installation. Polyaspartic has a strong odor, so it is recommended to keep windows or doors open for ventilation during the installation process. All trash generated from the job will be placed in the homeowner's designated trash bin. Payment is due immediately after the work is completed, and the preferred method of payment is cash.

installation

My workday starts early in the morning either 7:00 or 9:00 am depending on what we agreed. a text message is sent to you 15 minutes before I arrive at your residence. once onsite I briefly introduce myself to you and go over the process. After the epoxy application is completed we do a walkthrough to ensure your fully satisfied with the work performed.